BT RRE200 - Placing the Operating Console in the Truck

Steering system 4000
Electric steering wheel (4310)
Publication No. Date Valid from serial number T-code
261828-040 2008-08-21 6051502 815, 816
© BT Repair Manual RRE140/160/180/200/250 12 – 5
12.1.5 Placing the operating console in the
truck
1. Place the operating console on the truck.
2. Tighten the three screws (d) (torx 30) that hold the operating con-
sole in place.
3. Connect the connector unit (c) by the wall.
4. Refit the panels around the operating console.
d
c