Functions and parameters
Operator compartment
Publication No. Date Valid from serial number T-code
261828-040 2008-08-21 6051502 815, 816
© BT Repair Manual RRE140/160/180/200/250 4 – 17
4.6.2 Single control
a: CID Central Information Display.
b: Fork lift/lower.
c: Fork carriage reach/retraction.
d: Tilt.
e: Extra function 1 (sideshift, for example).
f: Extra function 2 and 3 (forkspread, for example).
g: 8 buttons for selectable functions (parameter settings).
Function examples:
- Height preselector.
- Height limitation override. The function is active for 5 seconds,
and if the the first height limitation is passed, the next one applies.
- Horizontal tilt position.
- Sideshift zero position.
- Selection of extra hydraulic function 3 (active as long as the func-
tion is used and for 15 seconds afterwards) or switching detected
by service parameter.
- Operator cabin tilt.
- Turn signal lights.
h: Travel direction selector.
j: Horn.
a
b
c
d
e
f
g
h
j
To Next Page
Loading...
