Steering system 4000
Electric steering wheel (4310)
Publication No. Date Valid from serial number T-code
261828-040 2008-08-21 6051502 815, 816
© BT Repair Manual RRE140/160/180/200/250 12 – 1
12 – Steering system 4000
12.1 Electric steering wheel (4310)
12.1.1 General
The steering wheel module has a pulse transducer fitted under the
steering wheel. The pulse transducer can be replaced without remov
-
ing the operating console from the truck.
If the wiring harness inside the operating console must be replaced, the
entire operating console should be removed from the truck.
12.1.2 Replacing the pulse transducer on the
steering wheel module
1. Remove four screws (a) (torx 10) from the underside of the steering
wheel module.
2. Remove the bottom panel (b).
3. Remove the disc with the logo from the centre of the steering
wheel.
4. Remove two screws (c) (torx 20) and the washer (d).
5. Remove the steering wheel (e) and the spacer (f).
6. Undo the connector unit for the pulse transducer.
7. Remove the three screws (g) (torx 20) that hold the pulse transduc-
er (h) in place.
8. Reassemble in reverse order.
a
b
c
d
e
f
g
h
To Next Page
Loading...
