Frame/Chassis 0000
Operator compartment (0600)
Publication No. Date Valid from serial number T-code
261828-040 2008-08-21 6051502 815, 816
© BT Repair Manual RRE140/160/180/200/250 8 – 3
8.4 Operator compartment (0600)
8.4.1 Internal fittings (0680)
The interior of the operator compartment consists of interconnected
panels that are tightly locked together, as well as with the cabin chassis.
Most of the panels are held in place without the use of screws or snap
fasteners, but to remove the panels they must be dealt with in
sequence.
1. Remove screw 'a' on the right of the tiller arm and remove the pan-
el.
2. For the next panel, remove screw 'b' located in front of the tiller arm.
This panel is also fixed in place with a snap fastener (c). Remove
the entire panel.
3. The remaining panels can now be removed one by one in se-
quence, without the use of tools.
4. Refit in reverse order.
a
a
b
c
To Next Page
Loading...
