Electrical system 5000
Parameter settings
Publication No. Date Valid from serial number T-code
261828-040 2008-08-21 6051502 815, 816
© BT  Repair Manual  RRE140/160/180/200/250  13 –   13
PIN menu
The PIN settings menu is used to manage PIN codes. This menu can 
only be accessed when a service key is connected.
All the PIN codes can be reset to their factory settings by selecting the 
factory symbol (a) and then pressing the green (l) button. During the 
time that the information is being stored in the MCU, an hourglass is 
displayed on the screen. 
The PIN block menu (b) and PIN programming menu (c) are accessed 
from here.
The PIN codes are organised in blocks and profiles, with ten PIN codes 
for each of the ten operator profiles.
 
Menu for activating a PIN block
Each PIN block can be activated (E, enable) or deactivated (D, disable) 
separately. 
The PIN blocks are listed in two columns with a number from 0 to 9. 
Active/non-active status is indicated by an "E" or a "D" to the right of 
each block number. 
To change status, use the arrow keys to select a block. Use the plus 
button to activate the block and the minus button to deactivate it. The 
value is saved by pressing the green button (I) and the next block in the 
list is selected. 
Menu for programming a PIN (P)
It is possible to program your own PIN codes in this menu. 
Use the block and profile number to select the PIN code to be changed; 
the value for the block and profile is changed using the plus/minus but
-
tons or numerical buttons. 
A new PIN code is entered using the numerical buttons in the PIN box. 
The value is saved in the MCU by pressing the green button (I).
Table 1: Standard PIN code set
Profile: 1 2 3 4 5 6 7 8 9 10
Block 0
0001 0002 0003 0000 0000 0000 0000 0000 0000 0000
Block 1
7901 1437 3731 1049 9439 7265 1322 2869 1574 5421
Block 2
4854 2907 9175 5799 1490 3031 7392 5622 5023 1787
Block 3
3174 1026 3815 6703 1179 5152 7514 5668 3215 4659
Block 4
7110 5477 3846 9491 5918 8222 6923 8139 7025 9197
Block 5
6276 9879 9658 1690 4042 5201 9807 4332 9715 2549
Block 6
4142 8620 3754 8432 8788 7430 1948 2595 8527 7474
Block 7
1482 7135 2395 7365 7092 4611 2831 4185 6067 1930
Block 8
4731 1022 5377 3257 7334 9009 7881 8843 7436 2876
Block 9
5878 2828 1910 6907 2136 5730 2957 7691 3162 3242