Installation
Initial operation
Publication No. Date Valid from serial number T-code
261828-040 2008-08-21 6051502 815, 816
© BT Repair Manual RRE140/160/180/200/250 5 – 3
5.2.2 Parameters on initial operation
Full calibration of the functions is described in section “13.3 Parameter
settings”.
Battery
The size (capacity) of the battery fitted in the truck must be
specified using parameter 107
.
So as not to run the battery down completely, a limit is set beyond which
a reduction in truck performance must be initiated
Load indicator
The load indicator must be calibrated for each truck. Incorrect load cal-
ibration can result in incorrect speed and brake force limits and the load
indicator on the CID/LID giving the wrong indication.
Can be combined with the LID (Load Indication Display) (option) and
then height information is displayed on the LID
.
Ergo cabin
When the cabin is not in its very lowest position, there is a reduction in
speed (4 km/h), acceleration (30 %) and automatic braking (30 %) to
give gentler driving.
.
Parameter
no.
RRE140 RRE160 RRE180 RRE200 RRE250
450 600 450 450 750 600 600 750 600 750 450 600
107
Battery capacity limit for reduction in
truck performance
Parameter no.
108
Limit as a % of BDI 5
Weight indicator, type Parameter no.
1016
Base version, measurement only on free lift 0
Full measurement 1
Ergo function Parameter no.
6 355
Height above free lift once the Ergo cabin
starts tilting
1000
Height when the Ergo cabin starts to tilt
down
500
To Next Page
Loading...
