BT RRE200 - Placing the Support Arm Wheel in the Truck

11 – 14 Repair Manual RRE140/160/180/200/250 © BT
Brake and wheel 3000
Support arm wheel (3550)
T-code Valid from serial number Date Publication No.
815, 816 6051502 2008-08-21 261828-040
11.5.4 Placing the support arm wheel in the
truck
1. Position the support arm wheel correctly in the support arm.
2. Insert the axle (c) and (d) correctly in the support arm.
3. Place the screw (e) and washer in the axle - tightening torque 83
Nm.
4. Braked wheel:
Connect the brake connector unit to the cable in the support arm.
Thread the connector unit into the support arm.
Replace the protective cover (b) on top of the cable.
5. Replace any guards (a, b) on top of the support arm wheel.
6. Let the support arm down and function test the truck.
a
b
c
d
e