BT RRE200 - Main Lift Chain System, Adjusting the Fork-To-Floor Distance

Mast/Lift system 7000
Main lift chain system (7120)
Publication No. Date Valid from serial number T-code
261828-040 2008-08-21 6051502 815, 816
© BT Repair Manual RRE140/160/180/200/250 15 – 21
15.2.4 Main lift chain system, adjusting the
fork-to-floor distance
The lift chains must be adjusted at regular periods due to elongation.
Chain adjustment is checked as part of regular maintenance as speci
-
fied in the maintenance schedule.
Using the free lift chain and main lift chains, the mast runners should be
adjusted so that the bottom part of the mast is level.
Then the forks are adjusted so that the fork holes are 10-15 mm from
the floor.
IMPORTANT!
The forks should be tilted into their horizontal position.
10-15 mm