9 – 10 Repair Manual RRE140/160/180/200/250 © BT
Motors 1000
Fan motor/fan (1740)
T-code Valid from serial number Date Publication No.
815, 816 6051502 2008-08-21 261828-040
4. Disconnect the cooling fan harness.
5. Remove the screw (c) (10 mm hex screw) that holds the cooling
fan's mounting bracket.
6. Remove the cooling fan (d).
7. Place the new cooling fan. Ensure the two pins in the cooling fan's
mounting bracket engage in the vibration dampers (e) in the cool
-
ing block.
8. Screw the cooling fan in place.
9. Connect the harness.
10. Refit any covers or the floor.
d
e
c
Standard model
Ergo model
To Next Page
Loading...
