4 – 34 Repair Manual RRE140/160/180/200/250 © BT
Functions and parameters
Operation and connection sequences
T-code Valid from serial number Date Publication No.
815, 816 6051502 2008-08-21 261828-040
Event: 3. Basic control criteria
Previous event 2a. Login via unit connected to the MCU
or
2b. Login via keypad
or
2c. Login via "Access card" option
or
2d. Login to emergency driving mode
2a, 2b & 2c – CID displays the standard screen:
2d – CID displays the standard screen for emergency driving:
2d – During emergency driving and if a LID is installed and activated,
this displays the following:
At the same time, all LED icons on the CID & LID flash and a buzzer
sounds.
Action(s) Weight is put on the operator seat so that the sensor [B49] closes and
activates input A5-X130:41 “INP. SEAT SWITCH”
The safety pedal [B31] is depressed and activates input A5-X130:31
“INP. LEFT FOOT SWITCH”
Contributing factors The emergency stop button [S21] is not depressed.
Resulting conditions It is possible to drive the truck, 2a, 2b & 2c, according to the parame-
ters for the current operator profile and emergency driving, 2d, with
greatly reduced speed for all functions.
To Next Page
Loading...
