Choice of Device Type (IS3 or TS5/TS7)
SMART MATRIX - 2-10 -
Choice of Device Type (IS3 or TS5/TS7)
This function allows you to choose the type of devices used in your application: either Yarn Running Sensors
(IS3F) or Tension Sensors (TS5/TS7).
No mixed configurations are allowed!
Some parameters and menu items shown on the SMART MATRIX WARP screens will depend on the choice
made with this function.
Enter the SETUP menu.
Select DEVICE.
Choose either IS3F or TS5.
To leave the function and activate the save function.
SAVE to save the choice, BACK to return to the previous
screen without saving, EXIT to return to menu.
SETUP
→
DEVICE
To Next Page
Loading...
