Sensors Firmware Upgrade
SMART MATRIX - 2-33 -
Sensors Firmware Upgrade
This function allows you to upgrade the firmware of TS5/TS7 or IS3F sensors.
The TS5/TS7 or IS3F indication depends on the type of device chosen with the IDENTIFY function.
Enter the SETUP menu.
Select SERVICE.
Select TS5 UPG or IS3 UPG.
Select the coordinates of sensors to be updated, or all
sensors (ALL DEVICES).
To continue.
UPGRADE to carry out the firmware upgrading.
SETUP
→
SERVICE
→
XXX UPG
To Next Page
Loading...
