Offset TS5/TS7
SMART MATRIX - 2-32 -
OFFSET to carry out the calibration.
YES to confirm the operation.
OFFSET operation completed.
To select the sensor coordinates (Creel, Column and Row) you may use the lower “shortcut” buttons
or press in sequence the rotary selector.
Shortcut Buttons available to Speed-up the Selection
Creel Column Row
It selects all sensors of selected Creel/Column/Row.
It toggles the sensors selection status within the selected
Creel/Column/Row.
It clears all selections.
To Next Page
Loading...
