btsr SMART MATRIX WARP - Page 76

SMART MATRIX Error Message
SMART MATRIX - 2-54 -
TS5 mode with “Bars” priority
TENS H
CREEL #A
BAR #B
SEN #C
Tens error, H Creel #A Bar #B Sensor #C
TENS L
CREEL #A
BAR #B
SEN #C
Tens error, L Creel #A Bar #B Sensor #C
PEAK H
CREEL #A
BAR #B
SEN #C
Peak error, H Creel #A Bar #B Sensor #C
PEAK L
CREEL #A
BAR #B
SEN #C
Peak error, L Creel #A Bar #B Sensor #C
NO YARN
CREEL #A
BAR #B
SEN #C
No Yarn error, Creel #A Bar #B Sensor #C
ERR EEP
CREEL #A
BAR #B
SEN #C
EEprom data error, Creel #A Bar #B Sensor #C
ERR OUT
CREEL #A
BAR #B
SEN #C
Stop output error, Creel #A Bar #B Sensor #C
ERR TS5
CREEL #A
BAR #B
SEN #C
Communication error with TS5, Creel #A Bar #B Sensor #C
 The BAR and SEN indication are replaced by ROW and COL, if the IDENTIFY function was
programmed with Row or Column “Priority”. If the PROGRESSIVE mode has been set on the
OPTIONS menu, then instead of XXX#B + SEN#C the progressive number of the sensor will
appear.