Buffalo LS-VL - Page 198

LinkStation User Manual 197
Appendix
I26 Initializing all settings in the Web Admin interface.
I27 Checking a USB hard drive.
I28 Formatting a USB hard drive.
I32 The RAID should be rebuilt or a drive should be formatted. Normally this is
displayed after a hard drive has been replaced. Rebuild the RAID array or
format the hard drive in the Web Admin interface.
I46 Data migration or conversion (RAID migration) is in progress. Do not turn
o the LinkStation power.
I47 Data migration or conversion (RAID migration) is in progress. Do not turn
o the LinkStation power.