Buffalo LS-VL - Page 96

Using your LinkStation
LinkStation User Manual 95
• Changing to RAID 0 mode
1
Change system to normal mode (page 96).
2
3
4
5
6
The [Conrm Operation] screen will appear. Enter the number shown in the [Conrmation
Number] eld within 60 seconds, and click [Apply].
7
Follow the instructions displayed on the screen.
You have set up a RAID 0 array. Turn to page 36 to create a shared folder.
Click [System] - [Storage] - [RAID Array] in the Web
Admin interface.
Click the array you want to set.
Note:
For details on RMM and EDP, see page 100.
Select all available hard drives.
1 Select [raid 0].
2 Click [Create Raid Array].