Buffalo LS-VL - Page 97

Using your LinkStation
LinkStation User Manual 96
• Changing to Normal mode
1
2
3
Click [Delete RAID Array].
4
When [Are you sure you want to change RAID mode?] is displayed, click [Apply].
5
The [Conrm Operation] screen will appear. Enter the number shown in the [Conrmation
Number] eld within 60 seconds, and click [Apply].
6
Follow the instructions displayed on the screen.
You have congured Normal mode. Turn to page 36 to create a shared folder.
Click [System] - [Storage] - [RAID Array] in the Web
Admin interface.
Click the array you want to set.
Note:
For details on RMM and EDP, see page 100.