8630 - 115
OPERATING THE PROCESS CONTROLLER
Displays
The last display set in the AUTOMATIC mode is shown.
By selecting
PV_XXX
, the actual value of the process variable can be checked.
To display the actual position of the valve actuator during MANUAL operation, change to the display
POS_XXX
in advance in the AUTOMATIC mode.
Operating structure and procedures
MANUAL
mode
Valve closed at
normal speed
AUTOMATIC
mode
No operating action
release (> 5 sec.)
Configuration
Menu item
Release key
Release key
Valve closes
fast
Valve opens at
normal speed
Valve opens
fast
release
END
To Next Page
Loading...
