Instrumentation and Controls
. . . 132
Air Conditioning Mode
Press  to override the
automatic mode and turn the air
conditioning compressor off and
on.
The system will cool and
dehumidify the air inside the
vehicle.
Press  to return to automatic
operation.
In automatic mode, the air
conditioning compressor turns on
as needed.
You may notice water drip under
the engine sometimes after driving
with air conditioning on. This is
normal because your cooling
system removes moisture from the
air.
Heated Washer Fluid (If
equipped)
Push the heated washer fluid
button , located on the Heating
and Air Conditioning System
control panel, to turn the system
on and activate the automatic
mode.
See "Windshield Wipers/Washer
Stalk" later in this section for more
information.
Remote-Start Climate Control
Operation (If equipped)
This feature may automatically
activate certain climate control
functions when you use the
vehicle’s remote starter.
If activated, the climate control
settings will automatically adjust
to where they were last set.
When the ignition is turned to ON,
the climate control system will
return to normal operation.
See "Vehicle Remote-Start" in
Section 3 for more information.
AKENG40_CTS Page 132 Wednesday, July 23, 2008 11:47 AM
To Next Page
Loading...
Need help?
General
