225 . . .
–
Section 1
A disengaged mirror may shake or
flutter at normal driving speeds
and may not stay in position.
If a mirror ever becomes
disengaged, it will need to be
reset.
To reset a mirror, fold and unfold it
using the power controls.
Curb View Assist Mirror
(If equipped)
If your vehicle is equipped with the
Memory Feature, it is also
equipped with the Curb View
Assist Mirror feature.
With this feature turned on, the
passenger mirror will tilt down
whenever the vehicle is shifted
into R (Reverse) to allow you to
view the curb while you parallel
park.
Five seconds after you shift back
out of R (Reverse), the mirror will
return to its original position.
Use the Driver Information Center
to enable or disable this feature.
See the following under "Driver
Information Center" earlier in this
section for more information:
• Feature Customization
- PARK TILT MIRRORS
Inside Day/Night Mirror
NOTICE
Do not spray glass cleaner
directly onto the mirror. Use a
soft, clean cloth dampened
with water to clean the mirror.
The mirror pivots so that you can
adjust it up and down or side to
side.
AKENG40_CTS Page 225 Wednesday, July 23, 2008 11:47 AM
To Next Page
Loading...
Need help?
General
