327 . . .
–
–
–
Section 3
Battery Replacement
If the system does not respond to
the remote transmitter from any
location within the normal range,
you probably need to replace the
battery in the transmitter.
REPLACE BATTERY IN REMOTE
KEY may appear in the Driver
Information Center display.
See "Driver Information Center
Messages" in Section 1 for more
information.
NOTICE
When replacing the battery, use
care not to touch any of the
circuitry. Static from your body
transferred to these surfaces
may damage the transmitter.
To replace the battery:
1. Insert a thin, flat non-metal
object to separate the bottom
of the transmitter from the
top.
2. Use a pencil or a similar
non-metal object to remove
the old battery.
3. Put the new battery in positive
(+) side up.
Use the same type of battery as
the old one. If you use a
different type of battery as a
replacement, the transmitter
might be damaged.
CAUTION
Make sure that you dispose of
old batteries in accordance with
environmental protection
regulations to help protect the
environment and your health.
AKENG40_CTS Page 327 Wednesday, July 23, 2008 11:47 AM
To Next Page
Loading...
Need help?
General
