505 . . .
–
–
–
–
–
Section 5
17. Disconnect the hose from the
tire valve.
- Compressor kits equipped
with a selector switch:
Turn the end of the
hose counterclockwise to
disconnect it from the tire
valve stem.
- Compressor kits not
equipped with a selector
switch:
Pull the lever up to unlock the
air compressor inflator hose
from the tire valve stem.
18. Reinstall the cap on the valve
stem.
19. Store the hose in its original
location.
20. Store the air compressor
accessory plug in its original
position.
Restow the tire sealant and
compressor kit in reverse order as
removal.
CAUTION
Storing the tire sealant and
compressor kit or other
equipment in the passenger's
compartment of the vehicle
could cause injury. In a sudden
stop or collision, loose
equipment could strike
someone. Store them in the
proper place.
Disconnecting and
Replacing the Tire Sealant
Canister
The tire sealant canister supplies a
one-time use application for one
tire only.
After using the tire sealant, be sure
to replace the sealant canister in
the tire sealant and compressor kit.
AKENG40_CTS Page 505 Wednesday, July 23, 2008 11:47 AM
To Next Page
Loading...
Need help?
General
