Problems on the Road
. . . 504
13. Inflate the tire to the
recommended inflation
pressure as shown on the
Tire and Loading Information
Label.
See "Tire and Loading
Information Label" in Section 3
for more information.
14. Check the tire pressure using
the air pressure gage on the
tire sealant and compressor
kit.
The pressure gage reading is
slightly higher while the air
compressor is on. Turn the
compressor off to get an
accurate pressure reading.
To release excess air, push on
the metal stem in the center of
the tire valve or press the air
pressure deflation button (if
equipped).
CAUTION
Be careful not to overinflate
things. They could explode and
you or others could be injured.
Be sure to follow any
instructions that come with the
tire sealant and compressor kit.
Inflate the tire to its
recommended pressure.
Do not exceed the
recommended pressure.
15. Press O (off) or the on/off
button to turn the air
compressor off.
CAUTION
The air compressor may be hot.
Do not touch the compressor
until it has cooled down.
16. Remove the air compressor
plug from the accessory
power outlet.
AKENG40_CTS Page 504 Wednesday, July 23, 2008 11:47 AM
To Next Page
Loading...
Need help?
General
