Instrumentation and Controls
. . . 166
3. After choosing the desired
control, rotate the TUNE/
TONE knob to the right or
left, press the SEEK right or
left arrow buttons, or press
the FWD or REV
buttons to increase or
decrease the level of the
selected control.
To quickly set a speaker control to
its middle position, press and hold
the push-button under the desired
control for more than two
seconds.
You will hear one beep.
To quickly set all speaker and tone
controls to their middle positions,
press and hold the TUNE/TONE
knob for two seconds.
You will hear one beep.
Radio Controls
FINDING A STATION
Band Selection
Press the FM/AM button to
change between the AM and FM
bands.
Tuning
Rotate the TUNE/TONE knob to
the right to go to a higher station
and to the left to go to a lower
station.
AKENG40_CTS Page 166 Wednesday, July 23, 2008 11:47 AM
To Next Page
Loading...
Need help?
General
