Starting and Operating Instructions
. . . 348
SHIFT POSITIONS
The shift lever is located on the
center console.
There are several different shift
positions for your gear lever.
P (Park)
This locks your rear wheels. Use
this position to park the vehicle
and when starting the engine.
Your vehicle has an automatic
transmission shift lock control
system. With the engine running,
you have to fully apply the regular
brakes before you can shift out of
P (Park).
See "Vehicle Parking" later in this
section for more information.
CAUTION
When you leave your vehicle,
be sure the shift lever is fully in
P (Park) and the parking brake
is applied.
CAUTION
Do not leave your vehicle while
the engine is running.
The vehicle could move
suddenly. You or others may be
injured.
Park the vehicle so that it will
not roll and set the parking
brake.
Move the shift lever into
P (Park).
AKENG40_CTS Page 348 Wednesday, July 23, 2008 11:47 AM
To Next Page
Loading...
Need help?
General
