Service and Maintenance
. . . 394
Engine Cover (CTS-V Model
Only)
To access the engine oil and power
steering fill caps, only the larger
section of the engine cover needs
to be removed.
To remove the engine cover, do
the following:
1. Raise the front of the engine
cover to release the larger
section of the cover from the
ball studs .
2. Pull the cover forward until
the two sections of the engine
cover separate.
3. Lift the engine cover to
remove.
Reverse the steps to reinstall the
cover.
BB
A
AKENG40_CTS Page 394 Wednesday, July 23, 2008 11:47 AM
To Next Page
Loading...
