Cadillac 2008 CTS - Page 75

75 . . .
–
Section 1
Once the desired setting is
displayed, press the button to
select it.
You may now either exit program-
ming mode or program the next
available feature.
To exit programming mode, see
"Exiting Programming Mode" later
in this section.
See the following, later in this
section, for more information:
• EASY EXIT SETUP
• Memory Feature
EASY EXIT SETUP
Note: This feature may not be
available on all vehicles.
This feature allows you to select
the features that will be recalled
when the easy exit position is
enabled.
Press the button to enter the
submenu.
While in this submenu, press the
button repeatedly to scroll
through the following options:
• OFF
With this setting activated, the
Memory Feature’s easy exit
position will not be
automatically recalled.
• SEAT ONLY
With this setting activated, the
Memory Feature’s easy exit
position will only recall the exit
position for the driver’s seat.
• TILT ONLY
With this setting activated, the
Memory Feature’s easy exit
position will only recall the tilt
position of the steering wheel.
• TELESCOPE ONLY
With this setting activated, the
Memory Feature’s easy exit
position will only recall the
position of the telescopic
steering column.
AKENG40_CTS Page 75 Wednesday, July 23, 2008 11:47 AM