User Manual – Rev AJ California Instruments
4.2.3 Overview of Menu 2 and 3
level 1
level 2 level 3
MENU 2 ADVANCE
HARMONICS/TRACE
MEAS.
ANALYSIS
FUNCTION
VIEW
DATA MODE
SCALE
TRIG MOD E
TRIG SOURCE
TRIG PHASE
TRIG DELAY
START
APPLICA
STEADY STATE
TIONS
APPLICATIONS SETUP 1
TRANSIENTS MIL-STD 704 MODE
NORMAL STATE PREVIOUS SCREEN ABNORMAL OMNI OPTION
S EMERGENCY EMERGENCY RTCA-DO160D IEC 1000-4-13 TESTS IEC 1000-4-11 TEST
ALL MIL704 TESTS IEC 1000-4-11 STATE DIPS AND INTER. ABNORMAL
APPLICATIONS SETUP 2 RUN VOLT VARIATIONS PREVIOUS SCREEN PREVIOUS SCREEN
IEC 1000-4-13 CLASS PREVIOUS SCREEN
WH METER GROUP
DWELL
SETUP
SAVE REGISTER # LEVEL
REGISTERS
VIEW/EDIT REG # FRANGE
RECALL REGISTER # STEP
MORE
PREVIOUS SCREEN IHFREQ
RESONANT
MENU 3 UT
ILITY
UTILITY 1
GPIB ADDRESS
GPIB/RS232 SETUP
VOLT ALC RS232 BAUDRATE VOLT/CURR CONTROL
PREVIOUS SCREEN OL MODE RS232 DATA
INITIAL SETUP VOLTAGE TRIP DELAY RS232 PARITY
LIMIT SETUP RS232 STOPBITS VOLTAGE CUR LIMIT VOLT SENSE
MORE REVIOUS SCREEN CUR LIMIT PREV. SCREEN NO. OUTPUT P
UTILITY 2
FREQ LO FREQ PREV. SCREEN
CONFIGURATION CONFIG SETUP 1 FREQ HI PHASE
LANETWORK SETUP MORE HH:MM:SS NO. OUTPUT PHASE C
ELAPSED TIME ATURE ADVANCE PREVIOUS SCREEN VOLT RANGE TEMPER
VIEWING ANGLE DO160 VOLT MODE
PREVIOUS SCREEN MIL704 OL MODE
CONFIG SETUP 2 OUTPUT RELAY
IEC 4-11 MORE
IEC 4-13 VOLT SENSE
CLOCK/LOCK WAVE GROUP
WH METER CLOCK MODE
OUTPUT
RESISTIVE PUT CONFIG SETUP 3
1
NO. OUT
IM
UCTIVE
PEDANCE
IND MS704 VOLT ALC
MINIMUM SET ABD PREVIOUS SCREEN
LF
SYSTEM
MB
Series II only Series I only
ME
FS
ASUREMENT
VOLT VOLT FS
C
AL
CURR FS VOLT 0
EVIOUS SCREEN PR VOLT FS HT
VOLT FS 0
CURR FS
CURR 0
CURR FS HT
CURR 0 HT
PREVIOUS SCREEN
Series II only Series I only
OUTPUT CAL
VOLT FS VOLT FS
VOLT ZERO V HI-FREQ
PHASE OFST VOLT ZERO
IHARM FS PHASE OFST
IMP. REAL FS IMP. REAL FS
IMP. REACT FS IMP. REACT FS
IMP. REAL MIN IMP. REAL MIN
IMP. REACT MIN IMP. REACT MIN
PREVIOUS SCREEN PREVIOUS SCREEN
1
CONFIGURATION SETUP 3 menu available on Series II models only.
84 MX Series
To Next Page
Loading...
