Chapter 2: System Hardware
Force 300-16 interfaces
The Ethernet port is located on the rear of the integrated unit.
Table 62 Force 300-16 Series – rear interfaces
Power over Ethernet (PoE).
Note
All RJ45 Ethernet LAN cables used for
providing power or are connected to power
ports (PoE) must be UL certified with VW-1
markings.
Force 300-16 specifications
The Force 300-16 integrated module conforms to the specifications listed in Table 63 and Table 64.
The integrated module meets the low-level static discharge specifications identified in Electromagnetic
compatibility (EMC) compliance and provides internal surge suppression but does not provide lightning
suppression.
Table 63 Force 300-16 physical specifications
Dimensions (Diameter x
Depth)
12.4 cm x 25.1 cm x 11.9 cm (4.9 in x 9.9 in x 4.7 in)
–
with mounting
bracket
0.5 kg
(1.1
lbs) – with mounting bracket
Table 64 Force 300-16 environmental specifications
-30°C (-22°F) to +60°C (140°F)
112
mph (180 kph) maximum. See Force 300-16 wind loading for a full description.
IP55
Note
This product meets the UL/cUL 62368 / IEC 62368 edition 2
specification, and the radio housings are designed to be rain-tight.
To Next Page
Loading...
Need help?
General
