⚫
cnMaestro™ Cloud-based or On-premises Management System
⚫
Dynamic Host Configuration Protocol (DHCP)
Webserver
The ePMP management agent contains a web server. The web server supports access via the HTTP and
HTTPs interfaces.
Web-based management offers a convenient way to manage the ePMP equipment from a locally
connected computer or from a network management workstation connected through a management
network, without requiring any special management software. The web-based interfaces are the only
interfaces supported for the installation of ePMP, and the majority of ePMP configuration management
tasks.
Identity-based user accounts
When identity-based user accounts are configured, a security officer can define from one to four user
accounts, each of which may have one of the four possible roles:
⚫
ADMINISTRATOR (default username/password “admin”), who has full read and write permission.
⚫
INSTALLER (default username/password “installer”), who has permission to read and write
parameters applicable to unit installation and monitoring.
⚫
HOME (default username/password “home”), who has permission only to access pertinent
information for support purposes
⚫
READONLY (default username/password “readonly”), who has permission to only view the
Monitor page.
SNMP
The management agent supports fault and performance management utilizing an SNMP interface. The
management agent is compatible with SNMP v2c using one Management Information Base (MIB) file
which is available for download from the Cambium Networks support site:
https://support.cambiumnetworks.com/files/epmp.
Network Time Protocol (NTP)
The clock supplies accurate date and time information to the system. It can be set to run with or without
a connection to a network time server (NTP). It can be configured to display local time by setting the
time zone and daylight saving on the Time web page.
If an NTP server connection is available, the clock can be set to synchronize with the server time at
regular intervals.
ePMP devices may receive NTP data from a CMM module or an NTP server configured in the system’s
management network.
The Time Zone option is configurable on the
Configure
>
System
page and may be used to offset the
received NTP time to match the operator’s local time zone.
Software upgrade
Software upgrades may be issued via the radio web interface (
Tools
>
Software Upgrade
) or cnMaestro
(cloud.cambiumnetworks.com). For software upgrades, see
https://support.cambiumnetworks.com/files/epmp.
To Next Page
Loading...
Need help?
General
