⚫
Maximum transmit power
⚫
Radar avoidance (future release)
⚫
Frequency range
Further reading on the wireless operation
For information on planning wireless operation, see:
⚫
The regulatory restrictions that affect radio spectrum usages, such as frequency range and radar
avoidance are described under Radio spectrum planning.
⚫
The factors to be taken into account when planning links such as range, path loss, and data
throughput are described under Link planning.
⚫
The safety specifications against which the ePMP has been tested are listed under Compliance
with safety standards . It also describes how to keep RF exposure within safe limits.
⚫
How ePMP complies with the radio regulations that are enforced in various countries is explained
in Compliance with radio regulations.
For more information on configuring and operating the wireless link, see:
⚫
The configuration parameters of the ePMP devices are described under Using the menu options.
⚫
Post-installation procedures and troubleshooting tips are explained under Operation and
Troubleshooting.
System management
This section introduces the ePMP management system, including the web interface, installation, alerts,
and upgrades, configuration, and management software.
Management agent
ePMP equipment is managed through an embedded management agent. Management workstations,
network management systems, or PCs can be connected to this agent using the module’s Ethernet port,
SFP port, over the air (Subscriber Module connection via AP), or by using the device Wi-Fi management
interface.
The management agent supports the following interfaces:
⚫
Hypertext Transfer Protocol (HTTP)
⚫
Hypertext Transfer Protocol Secure (HTTPs)
⚫
Simple Network Management Protocol (SNMP)
⚫
Network Time Protocol (NTP)
⚫
System logging (Syslog)
To Next Page
Loading...
Need help?
General
