Chapter 3: System Planning
This chapter provides information to help the user to plan an ePMP link.
The following topics are described in this chapter:
âš«
How to plan ePMP links to conform to the regulatory restrictions that apply in the country of
operation is explained under Radio spectrum planning
âš«
Factors to be considered when planning links such as range, path loss, and throughput are
described under Link planning
âš«
The grounding and lightning protection requirements of an ePMP installation are described under
Grounding and lightning protection
âš«
Factors to be considered when planning ePMP data networks are described under Data network
planning
Radio spectrum planning
This section describes how to plan ePMP links to conform to the regulatory restrictions that apply in the
country of operation.
General wireless specifications
The wireless specifications that apply to ePMP 802.11ac variants are listed under Table 128. The wireless
specifications that are specific to each frequency variant are listed in Table 129.
Table 128 Wireless specifications (all variants)
To avoid interference with other users of the band, maximum power can be set
lower than the default power limit.
To Next Page
Loading...
Need help?
General
