ePMP 4500C Access Point mounting instructions
ePMP 4500C Access Point software packages
ePMP 4500C AP devices may be upgraded by downloading new software packages from the Cambium
Networks site or by using cnMaestro. The software packages applicable to ePMP connectorized radios
are named:
âš«
ePMP-AX-v5.x.x.img (or higher version number)
ePMP 4500 Access Point
For details of the ePMP 4500 Access Point hardware, see:
âš«
ePMP 4500 Access Point description
âš«
ePMP 4500 Access Point part numbers
âš«
ePMP 4500 Access Point mounting bracket
âš«
ePMP 4500 Access Point interfaces
âš«
ePMP 4500 Access Point specifications
âš«
ePMP 4500 Access Point heater
âš«
ePMP 4500 Access Point wind loading
âš«
ePMP 4500 Access Point mounting instructions
âš«
ePMP 4500 Access Point software packages
ePMP 4500 Access Point description
The ePMP 4500 device is a self-contained transceiver unit that houses both radio and networking
electronics. It is available with 8 X 8 MU-MIMO integrated antenna.
An overview of ePMP 4500 is shown in Figure 34.
To Next Page
Loading...
Need help?
General
