Cambium Networks Force 4600C User Manual

Chapter 2: System Hardware
77
Table 22 ePMP 4600 Series – rear interfaces
Port
name
Connector
Interface
Description
Eth
RJ45
PoE input
Power over Ethernet (PoE).
Note
All RJ45 Ethernet LAN cables used for
providing power or are connected to
power ports (PoE) must be UL
certified with VW-1 markings.
100/1000BASE-T Ethernet
Data
SFP
SFP
Optical or Copper Gigabit
Ethernet
Management and/or data
ePMP 4600 Access Point specifications
The ePMP 4600 connectorized module conforms to the specifications listed in Table 23and Table 24.
The connectorized module meets the low-level static discharge specifications identified in
Electromagnetic compatibility (EMC) compliance and provides internal surge suppression but does not
provide lightning suppression.
Table 23 ePMP 4600 Access Point physical specifications
Category
Specification
Dimensions (Length x Width x
Height)
22.2 cm x 12.4 cm x 4.5 cm (8.75 in x 4.9 in x 1.75 in) without
brackets
Weight
12.5 kg (27.56 lbs) without brackets
14.66 kg (32.32 lbs) with brackets
Table 24 ePMP 4600 Access Point environmental specifications
Category
Specification
Temperature
-30°C (-22°F) to +55°C (131°F)
Wind loading
124 mph (200 kph) maximum. See ePMP 4600 Access Point wind loading (Kg) for a
full description
Humidity
95% condensing
Environmental
IP67
Note
This product meets the UL/cUL 62368 / IEC 62368 edition 2
specification, and the radio housings are designed to be rain-tight.

Cambium Networks Force 4600C Specifications

General

Brand	Cambium Networks
Model	Force 4600C
Category	Network Hardware
Language	English