Cambium Networks Force 4600C User Manual

Chapter 2: System Hardware
55
Figure 29: ePMP 3000 Access Point module mounting bracket
ePMP 3000 Access Point interfaces
The Ethernet port is located at the bottom of the unit. This interface is described in Table 14.
Table 14 ePMP 3000 Series – rear interfaces
Port
name
Connector
Interface
Description
Eth
RJ45
PoE input
Power over Ethernet (PoE).
Note
All RJ45 Ethernet LAN cables used for
providing power or are connected to power
ports (PoE) must be UL certified with VW-1
markings.
100/1000BASE-T
Ethernet
Data.
SFP
SFP
Optical or Copper
Gigabit Ethernet
Management and/or data.
ePMP 3000 Access Point specifications
The ePMP 3000 connectorized module conforms to the specifications listed in Table 15 and Table 16.
The connectorized module meets the low-level static discharge specifications identified in
Electromagnetic compatibility (EMC) compliance and provides internal surge suppression but does not
provide lightning suppression.

Cambium Networks Force 4600C Specifications

General

Brand	Cambium Networks
Model	Force 4600C
Category	Network Hardware
Language	English