Cambium Networks Force 4600C User Manual

Chapter 1: Product Description
24
Characteristic
Value
Wireless link condition
LoS, near LoS
Scheduler
TDD
Connectivity
Ethernet
Operating frequencies
Unlicensed bands, 5 GHz
Channel Bandwidth
20 MHz, 40 MHz, 80 MHz
Data rate
Up to 1+ Gbps Sector Throughput
ePMP MP 3000 MicroPoP
The ePMP MP 3000 MicroPoP is an integrated AP designed to serve short-range, low-density
applications. It uses 802.11ac 2x2 architecture and can interoperate with a Force 300 subscriber module.
An overview of ePMP MP 3000 is shown in Figure 3.
Figure 3: ePMP MP 3000 MicroPoP
ePMP 4500C
The ePMP 4500C is the third-generation Access Point (AP) that carries on the interference tolerance
mechanisms with an emphasis on high-performance in low-density point to multipoint sectors. The ePMP
4500C is a 8 X 8 MU-MIMO connectorized AP that can support a wide variety of deployments including
90/120-degree sectors, narrow-sector horns, or even 360-degree Omni coverage.
The ePMP 4500C system consists of the ePMP 4500C AP, an optional 8 x 8 sector antenna, and a wide
variety of subscriber modules with varying form factors and link budgets.
The ePMP 4500C system boasts a high packet per second performance, peak throughput of 3 Gbps, and
supports subscriber modules with up to 3 Gbps of peak throughput.
An over view of ePMP 4500C is shown in Figure 4

Cambium Networks Force 4600C Specifications

General

Brand	Cambium Networks
Model	Force 4600C
Category	Network Hardware
Language	English