* The 10 MHz Channel Bandwidth is only supported with Force 300-19R SM.
ePMP 3000L
The ePMP 3000L is the third-generation Access Point (AP) that carries on the interference tolerance
mechanisms with an emphasis on high-performance in low-density point to multipoint sectors. The ePMP
3000L is a 2x 2 MIMO connectorized AP that can support a wide variety of deployments including
90/120-degree sectors, narrow-sector horns, or even 360-degree Omni coverage.
Also, the ePMP 3000L continues interference mitigation techniques with the support of TDD
synchronization using GPS and the robust software from the ePMP product line. The ePMP 3000L system
consists of the ePMP 3000L AP, an optional 2x2 sector antenna, and a wide variety of subscriber modules
with varying form factors and link budgets.
ePMP 3000 supports backward and forward compatibility with ePMP 802.11n devices to provide an
immediate sector upgrade to 802.11ac Wave 2 performance, and also to support future upgrades of
networks operating ePMP 1000/2000 APs.
The ePMP 3000L system boasts a high packet per second performance, peak throughput of 600 Mbps,
and supports subscriber modules with up to 600 Mbps of peak throughput.
An over view of ePMP 3000L is shown in Figure 2
Figure 2:
ePMP 3000L
A summary of the main ePMP 3000L characteristics are listed under Table 2.
Table 2 Main characteristics of the ePMP 3000L Series
To Next Page
Loading...
Need help?
General
