Cambium Networks Force 4600C User Manual

Chapter 2: System Hardware
62
Wind blowing on the device will subject the mounting structure to significant lateral force. The
magnitude of the force depends on both wind strength and the surface area of the device. Wind loading
is estimated using the following formulae:
Force (in kilograms) = 0.1045aV
2
Where:
Is:
a
the surface area in square meters
V
wind speed in meters per second
Force (in pounds) = 0.0042
Av
2
Where:
Is:
A
the surface area in square feet
V
wind speed in miles per hour
Applying these formulae to the ePMP device at different wind speeds, the resulting wind loadings are
shown in Table 26 and Table 27.
Table 26 ePMP 3000L Access Point wind loading (Kg)
Type of ePMP device
Largest
surface area (square
meters)
Wind speed (meters per
second)
40
50
60
ePMP 3000L Access Point with Sector
Antenna
0.13
21.74 Kg
33.96
Kg
48.91 Kg
Table 27 ePMP 3000L Access Point wind loading (lb)
Type of ePMP device
Largest surface area (square
feet)
Wind speed (miles per
hour)
80
100
120
ePMP 3000L Access Point with Sector
Antenna
1.4
37.63
lb
58.80
lb
84.67
lb
ePMP 3000L Access Point software packages
ePMP 3000L AP devices may be upgraded by downloading new software packages from the Cambium
Networks site or by using cnMaestro. The software packages applicable to ePMP integrated radios are
named:
⚫
ePMP-AC-v4.5-GA.img (or higher version number)

Cambium Networks Force 4600C Specifications

General

Brand	Cambium Networks
Model	Force 4600C
Category	Network Hardware
Language	English