Chapter 2: System Hardware
ePMP 5GHz Force 300-13 SM (ROW) (South Africa cord)
ePMP 5GHz Force 300-13 SM (ROW) (No PSU)
Table 69 Force 300-13 accessory part numbers
PoE Gigabit DC Injector, 15W Output at 30V, Energy Level 6 Supply
CABLE, UL POWER SUPPLY CORD SET, ARGENTINA
CABLE, UL POWER SUPPLY CORD SET, AUS/NZ
CABLE, UL POWER SUPPLY CORD SET, Brazil
CABLE, UL POWER SUPPLY CORD SET, CHINA
CABLE, UL POWER SUPPLY CORD SET, EU
CABLE, UL POWER SUPPLY CORD SET, INDIA
CABLE, UL POWER SUPPLY CORD SET, UK
CABLE, UL POWER SUPPLY CORD SET, US
Force 300-13 interfaces
The Ethernet port is located on the rear of the integrated unit.
Table 70 Force 300-13 Series – rear interfaces
Power over Ethernet (PoE).
Note
All RJ45 Ethernet LAN cables used for
providing power or are connected to power
ports (PoE) must be UL certified with VW-1
markings.
Force 300-13 specifications
The Force 300-13 integrated module conforms to the specifications listed in Table 71 and Table 72.
The integrated module meets the low-level static discharge specifications identified in Electromagnetic
compatibility (EMC) compliance and provides internal surge suppression but does not provide lightning
suppression.
To Next Page
Loading...
Need help?
General
