Chapter 2: System Hardware
An overview of Force 300-19 mounting bracket is shown in Figure 45
Figure 45:
Force 300-19 module mounting bracket
Force 300-19 interfaces
The Ethernet port is located on the rear of the integrated unit. This interface is described in Table 46
Table 46 Force 300-19 Series – rear interfaces
Power over Ethernet (PoE).
Note
All RJ45 Ethernet LAN cables used for
providing power or are connected to power
ports (PoE) must be UL certified with VW-1
markings.
Force 300-19 specifications
The Force 300-19 integrated module conforms to the specifications listed in Table 47and Table 48.
The integrated module meets the low-level static discharge specifications identified in Electromagnetic
compatibility (EMC) compliance and provides internal surge suppression but does not provide lightning
suppression.
Table 47 Force 300-19 physical specifications
27.8 cm x 27.8 cm x 4.5cm (10.9 in x 10.9 in x 1.8 in)
1.45 kg (3.2 lbs) (Including mounting bracket)
To Next Page
Loading...
Need help?
General
