Cambium Networks Force 4600C User Manual

Chapter 2: System Hardware
57
Wind blowing on the device will subject the mounting structure to significant lateral force. The
magnitude of the force depends on both wind strength and the surface area of the device. Wind loading
is estimated using the following formulae:
Force (in kilograms) = 0.1045aV
2
Where:
Is:
a
the surface area in square meters
V
wind speed in meters per second
Force (in pounds) = 0.0042Av
2
Where:
Is:
A
the surface area in square feet
V
wind speed in miles per hour
Applying these formulae to the ePMP device at different wind speeds, the resulting wind loadings are
shown in Table 18 and Table 19.
Table 18 ePMP 3000 Access Point wind loading (Kg)
Type of ePMP device
Largest
surface area (square meters)
Wind speed (meters per second)
40
50
60
ePMP 3000 AP with Sector Antenna
0.13
21.74 Kg
33.96 Kg
48.91 Kg
Table 19 ePMP 3000 Access Point wind loading (lb)
Type of ePMP device
Largest surface area (square feet)
Wind speed (miles per hour)
80
100
120
ePMP 3000 AP with Sector Antenna
1.4
37.63 lb
58.80 lb
84.67 lb
ePMP 3000 Access Point software packages
ePMP 3000 AP devices may be upgraded by downloading new software packages from the Cambium
Networks site or by using cnMaestro. The software packages applicable to ePMP integrated radios are
named:
⚫
ePMP-AC-v4.5-GA.img (or higher version number)
ePMP 3000L Access Point
For details of the ePMP 3000L Access Point hardware, see:
⚫
ePMP 3000L Access Point description
⚫
ePMP 3000L Access Point part numbers
⚫
ePMP 3000L Access Point mounting bracket

Cambium Networks Force 4600C Specifications

General

Brand	Cambium Networks
Model	Force 4600C
Category	Network Hardware
Language	English