Cambium Networks Force 4600C User Manual

Chapter 1: Product Description
26
Figure 5: ePMP 4500
A summary of the main ePMP 4500 characteristics are listed under Table 2.
Table 2 Main characteristics of the ePMP 4500 Series
Characteristic
Value
Topology
PMP
Wireless link condition
LoS, near LoS
Scheduler
WLR, TDD
Connectivity
Ethernet
Operating frequencies
Unlicensed bands, 5 GHz
Channel Bandwidth
20 MHz, 40 MHz, 80 MHz
Data rate
3 Gbps
ePMP 4600
The ePMP 4600 is the third-generation Access Point (AP) that carries on the interference tolerance
mechanisms with an emphasis on high-performance in low-density point to multipoint sectors. The ePMP
4600 is a 4 x 4 MIMO connectorized AP that can support a wide variety of deployments including
90/120-degree sectors, narrow-sector horns, or even 360-degree omni coverage.
The ePMP 4600 system consists of the ePMP 4600 AP, an optional 4x4 sector antenna, and a wide
variety of subscriber modules with varying form factors and link budgets.
The ePMP 4600 system boasts a high packet per second performance, peak throughput of 4.3 Gbps, and
supports subscriber modules with up to 4.3 Gbps of peak throughput.
An over view of ePMP 4600 is shown in Figure 6

Cambium Networks Force 4600C Specifications

General

Brand	Cambium Networks
Model	Force 4600C
Category	Network Hardware
Language	English