3.
Film Loading and Rewind
~r
~
WL-J:sLl
cc
"\.
~
"c,,"'
:]
~
1) Move the command dial to a position other
than
"
~
"
.
2) Open the back cover by sliding the back
cover latch down.
3)
Insert the film cartridge with the flat end
facing up and the bottom end entering the
camera first.
4)
While holding down the film cartridge,
carefully
pu
ll
the film tip across
un
t
il
it
reaches the orange mark.
5)
After checking that the film lies flat and that
the tip is aligned with the orange mark,
close the back cover.
• The fi
lm
automatically advances to the
first frame, the frame counter shows
"1
"
and the film cartridge symbol (
@ )
is
displayed
in
the L
CD
panel.
•
If
the film cartridge symbol blinks, the film
is
not loaded correctly. Reload the film. If
the film
is
not loaded correctly, the shutter
will not release when the
sh
utter button is
pressed.
13
To Next Page
Loading...
