Canon EOS A2E - Exposure Compensation; Adjusting Exposure Compensation

6. Exposure Compensation
When taking pictures in an AE shooting
mode, y
ou can use the quick control dial to
vary the exposure according to the subject
conditions. Exposure can
be compensated
up to ± 2 stops
in 1 12-stop in crements.
1) Set the quick control dial switch to I
2) Focus the subject and confirm the expo-
sure.
3) Turn the quick control dial to set the
desired exposure compensation amount.
* The compensation amount is displayed
in the L CD panel and viewf in der. "+"
compensati on overexposes th e sub-
ject and "
-" compensation underex-
poses
it.
* After setting the desired compensation
amount, it
is a good idea to set the quick
control dial switch to 0 to prevent ac-
cidental alteration of the setting.
4) Take the picture .
•
To cancel exposure compensation, re-
peat step 3 to return the compensation
amount to
0, then set the quick control
dial switch to
o.
33