9. Flash Exposure Compensation
This function lets you vary the automatic
flash exposure level of the built-in flash and
EOS
external flash units. The flash exposure
can
be
compensated up to
±2
stops
in
1/2-
stop increments.
1)
Press the flash button to pop
up
the built-
in
flash.
2)
Press the flash button again and turn the
main dial or quick control dial to set the
desired compensation amount.
* To use the quick control dial, set the
quick control dial switch to
I .
~
lights
in
the
LCD
panel.
* The flash exposure compensation
amount
is
displayed
in
the
LCD
panel
and the viewfinder.
"+" indicates over-
exposure compensation and
"-"
indi-
cates underexposure compensation.
3)
Press the flash button again to complete
the flash exposure compensation setting.
The flash exposure compensation
amount disappears from the
LCD
panel
and viewfinder and the
AE
exposure com-
pensation display appears.
39
To Next Page
Loading...
