2.
Release the shutter once.
If
the battery indicator stops blinking, the prob-
lem is corrected and you can continue using
the camera normally.
If
the blinking does not
stop, the camera needs to
be
examined by
an
authorized Canon service facility.
3) Lithium Battery Information
Always check the battery
at
the following times:
1.
When loading a new battery
2.
After lengthy storage
3.
If
the shutter will not release
4.
In
cold weather
5.
Before
an
important shooting assignment
Battery Use Information
• Wipe the
ba
ttery terminals wi
th
a clean, dry
cloth to ensure proper contact.
• The battery may explode or cause burns if dis-
assembled, recharged, shorted, exposed to
high temperatures, or disposed of
in
fire.
Be
sure to observe
all
precautions indicated
on
the battery package. Always keep
it
out of the
reach of children.
• Battery performance deteriorates slightly
in
temperatures below
32°F
/
O°C.
Keep the
camera and especially a spare battery close to
your body or
in
an
inside pocket to keep it
warm until use.
• Remove the battery
if
you do not expect to use
the camera for more than three weeks.
4)
Camera Operation with a Low Battery
Even
if
the battery indicator blinks or does not
appear
in
the
LCD
panel during battery check,
exposure will
be
okay
as
long
as
the shutter re-
leases. Film advance and rewi
nd
wi
ll
be
im-
paired
by
insufficient battery power. If winding
or rewinding stops due to the battery, the film
cartridge symbol will blink.
Fi
lm
transport re-
sumes after a new battery is loaded and
th
e
film rewind button pressed.
73
To Next Page
Loading...
