1
tD
1)
Press the function button so that " @ "
appears
in
the
LCD
panel.
2)
Turn the main dial to select "1" or "0"
in
the
LCD
panel.
1:
Red-eye reduction
on.
@
is
displayed
in
the
LCD
panel.
0:
Red-eye reduction off. @
is
not dis-
played
in
the
LCD
panel.
• A lens hood attached to the lens wi
ll
block
light from the built-
in
flash. Always remove
the lens hood when using the built-in flash.
• The built-in flash and
an
external flash
cannot be used together.
• The built-in flash will not operate when
an
external flash unit or cover
is
attached to
the accessory shoe.
•
If
the built-in flash
is
held down while the
flash button
is
pressed, cC.:J will blink
in
the
LCD
panel and the camera will stop
operating. This
is
not a malfunction. Press
the shutter button halfway to resume nor-
mal
operatio
n.
37
To Next Page
Loading...
