54
Auto exposure bracketing
is
carried out
in
each mode
as
follows:
P:
Both the shutter speed and aperture value
are shifted.
Av
,
DEP,
M:
Only the shutter speed
is
shifted.
Tv,
X:
Only the aperture value
is
shifted.
* The bracketing amount
is
also dis-
played
in
the viewfinder.
3)
Set the command dial to the desired
shooting mode and take pictures.
• To cancel auto exposure bracketing, re-
peat steps 1 and 2 to reset the bracketing
amount to
O.
• Auto exposure bracketing
is
automatically
canceled when the battery
is
replaced.
• Auto exposure bracketing cannot be used
in
bulb mode or when using flash.
• Auto exposure bracketing can
be
used
in
X mode with flash units connected
through the
PC
terminal.
• The exposure level blinks
in
the LCD
panel and viewfinder display during auto
exposure bracketing operation.
If
you wish to shift the bracketed exposure
values toward over- or underexposure, you
can
add exposure compensation using the
quick control dial.
In
this case the
LCD
panel
may not display the correct
va
lues, but expo-
sures will be made correctly.
To Next Page
Loading...
