IV
Shooting Modes & Functions
1.
P (Program AE)
In
this mode, the camera automatically sets
both the shutter speed and aperture accord-
ing to the subject brightness.
1)
Set the command dial to P.
2)
Press the shutter button halfway to focus
the subject and confirm the exposure.
3)
Press the shutter button completely to
take the picture.
Program shift function
When taking pictures
in
Program
AE
or
Depth-of-Field
AE
mode, you
can
"shift the
program" to the change the set
sh
utter speed
and aperture val
ue
combination whi le ma
in
-
taining the same exposure.
After pressing the shutter button
ha
lfway,
turn the main dial until the desired shutter
speed/aperture combinati
on
is displayed.
• The adjustment clears after one exposure
or continuous exposu
re
sequence .
• Program shift cannot be used with the
built-in flash or external dedicated flash
units.
41
To Next Page
Loading...
