CF9: Fixes the shutter speed at 1/ 200 sec When shooting indoors with flash
in
aperture-priority
AE
when using flash. mode, the camera
is
likely to set a slow shutter speed which
can result
in
blur caused by camera shake. This custom func-
tion prevents this from happening by fixing the shutter speed
at
1/200 sec regardless of the lighting conditions.
CF10: Prohibits superimposed
AF
frames
in
When a subject is focused, the
AF
frame used for focusing nor-
the viewfinder. mally lights red
in
the viewfinder. Setting this custom function
stops this from happening.
CF11: Adds a depth-of-field check function to Setting this function lets you use the
AE
lock button to check
the
AE
lock button.
the depth of field after the subject
is
focused and exposure
is
set.
This custom function cannot be used together with
CF4.
CF12: Enables shooting with the mirror When the shutter button
is
pressed completely
in
self-timer
locked up. mode, the mirror moves up immediately and the picture
is
taken two seconds later.
CF13: Cancels the metering timer function.
Setting this function cancels the timer which continues meter-
. Except
in
DEP
mode. ing for six seconds after your finger
is
removed from the shut-
ter button, thus saving battery power.
CF14: Changes the sync timing of the built-in
Flash firing synchronizes with the travel of the second shutter
flash from first curtain sync to second
curtain, providing a more natural effect when using slow shut-
curtain sync. ter speeds.
CF15: Links spot metering to the selected
AF
Setting this function lets you carry out spot metering at the
frame (only when the
AF
frame
is
se- same point
as
the selected
AF
frame, eliminating the need to
lected by the user). change the scene composition during metering.
CF16: Cancels automatic flash reduction
Setting this function cancels the automatic flash reduction
control.
control which normally operates with backlit subjects, thus
preventing the underexposure which can occur with subjects
backlit by a strong light source such
as
the afternoon sun .
•
If
both CF4 and CF6 are set, only CF4 IS used. •
If
both CF4 and
CF11
are set, only CF4 IS used.
60.
Custom function settings operate only in creative zone shooting mode.
To Next Page
Loading...
